E-COLL 1-K Multiprimer Spray grey 400 ml spray can

E-COLL 1-K Multiprimer Spray grey 400 ml spray can Product information

Multiprimer for metal

• Adhesion primer and primer filler for refinishing
• Can be painted over with 1K water-thinnable top coats
• Adhesion and corrosion protection properties
• Good insulation for edge zones of sanding and filling areas
• Weldable
• Bonding agent for factory primers, old paintwork, polyester substrates, aluminium, sheet steel and galvanized sheet steel
• Drying time approx. 30 minutes
• Can be painted over after approx. 10-15 minutes with 1K and 2K top coats
• Cross-cut GT1 according to DIN 53151
• Salt spray test max. 240 hours at 45 µ (mg) layer thickness

Danger

Hazard-determining components of labeling

• butan-1-ol
• Epoxy resin (700 1100)="" li="">

Hazard statements

• H229: Pressurized container: May burst if heated
• H319: Causes serious eye irritation
• H336: May cause drowsiness or dizziness
• H411: Toxic to aquatic life with long lasting effects
• H222: Extremely flammable aerosol
• H336: May cause drowsiness or dizziness
• H411: Toxic to aquatic life with long lasting effects

Precautionary statements

• P101 If medical advice is needed, have product container or label at hand
• P102 Keep out of the reach of children
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke
• P251 Do not pierce or burn, even after use
• P211 Do not spray on an open flame or other ignition source
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing
• P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F
• P501 Dispose of contents / container in accordance with local / regional / national / international regulations