Skylotec IGNITE PROTON WIND harness with fall arrest loop

Skylotec IGNITE PROTON WIND harness with fall arrest loop Product information

This fully equipped fall arrest, holding and climbing protection harness with plastic sliding plate was specially developed for wind energy. However, it is also used in many other areas where the highest demands on safety and functionality apply. IGNITE PROTON scores points with its thermoformed hip pad, which distributes the load evenly on the hips and is protected from abrasion from the outside with a protective plastic plate. The correct position of the safety eyelets can be perfectly adjusted to the user thanks to the ingenious design. Excess webbing is no longer a disturbing factor thanks to the practical webbing fixation. Shoulder and leg pads are washable or replaceable as required. Preformed material loops and tool loops for various applications make the harness a complete system.

Application area: power / overhead line construction / telecommunications, fire brigade / rescue / special forces, lifting platforms, steel construction, wind energy / offshore industry

• Standard: ANSI Z359.11:2014, MEETS CSA Z259.10:2012, EN 358:2018, EN 361:2002
• with back eyelet, holding eyelet, climbing protection eyelet and chest eyelet
• Temperature range: 45 °C - -35 °C
• Sizes: XS/M, M/XXL, XXL/5XL
• hip size: 74-121cm
• Weight: 2,91 kg
• Tape material: Polyester
• Material breast loop: aluminium
• Material holding eyelet: aluminium
• Material back eyelet: Aluminium
• Material climbing protection eyelet: Aluminium
• Lock material: stainless steel (V2A)